Currency Correlation and Hidden Portfolio Risk

7 min read

Opening three different trades does not always mean diversifying. If all three depend on the same thing (say, the dollar weakening), you have really opened one bet spread over three positions, and a single move can trigger all three stops at once. This guide explains correlation, how to calculate the combined risk of several trades, why correlation changes over time and how to set a risk limit for the whole portfolio.

What the correlation coefficient measures

The correlation coefficient runs from −1 to +1. A value near +1 means two instruments tend to move in the same direction; near −1, that they tend to move in opposite directions; near 0, that there is no appreciable linear relationship. It is normally calculated on returns (percentage changes) over a period, not on prices, because trending prices can look related when they are not.

A correlation of +0.8 does not mean they move together 80% of the time; it measures the strength of the linear relationship. It also describes only what happened in the measured window, and does not guarantee what comes next.

Pairs that tend to move together (and pairs that oppose each other)

EUR/USD and GBP/USD usually show a high positive correlation because both have the dollar as the quote currency and the European and British economies share similar cycles. Something similar happens with AUD/USD and NZD/USD. At the other extreme, USD/CHF usually has a negative correlation with EUR/USD, since the franc and the euro often move similarly against the dollar and the dollar sits on opposite sides of the two pairs.

Outside forex, gold often moves inversely to the dollar, and US stock indices move as a bloc (the S&P 500 and Nasdaq 100 usually show very high correlations). The actual values vary over time and with the window chosen, so treat them as tendencies, not constants.

Two correlated trades are almost one

Suppose you buy EUR/USD and buy GBP/USD, each risking 1% of the account. If both pairs rise because the dollar weakens, both win; but if the dollar strengthens across the board, both lose at once and you will have lost close to 2% for a single reason.

What looked like a portfolio of two trades at 1% risk is, in practice, one trade with a risk close to 2%. The problem is not that you trade two pairs, but that you count risk trade by trade and do not add up the trades that depend on the same factor.

Example: calculating combined risk

The worst possible loss, if both stops are hit, is always the sum: 1% + 1% = 2%. When correlation is high, that outcome is far more likely. A simple way to estimate the spread of the combined risk for two trades with risks r1 and r2 is √(r1² + r2² + 2 × ρ × r1 × r2), where ρ is the correlation.

With r1 = r2 = 1%: if ρ = +1, the combined risk is √(1 + 1 + 2) = 2%; if ρ = +0.85, it is √(2 + 1.7) = √3.7 ≈ 1.92%; if ρ = 0, it is √2 ≈ 1.41%; and if ρ = −0.9 (for example, buying EUR/USD and buying USD/CHF, which partly offset each other), it is √(2 − 1.8) = √0.2 ≈ 0.45%. With ρ near +1 diversification disappears, and with negative ρ the positions cancel each other out, but they also cancel their profit and you pay two spreads. This is an approximation, not a guarantee: it does not replace calculating the maximum loss.

Net exposure by currency

Every pair is a bet on two currencies at once: buying EUR/USD means buying euros and selling dollars. To see your real risk, add up exposure by currency. Suppose you are long one lot of EUR/USD (100,000 EUR, about 108,000 USD with the price at 1.08), long one lot of GBP/USD (100,000 GBP, about 127,000 USD with the price at 1.27) and short one lot of USD/CHF (100,000 USD).

All three trades are selling dollars: 108,000 + 127,000 + 100,000 = 335,000 USD of net short exposure, even though they look like three different trades. If you had bought EUR/USD and sold GBP/USD instead, the dollar exposure would almost fully offset (−108,000 + 127,000 = +19,000 USD) and what you would really be trading is the relationship between the euro and the pound.

How to size correlated trades

A practical rule: treat strongly correlated trades as one and split between them the risk you would assign to one. With a 10,000 USD account and a 1% budget (100 USD) for the “weak dollar” idea, you can assign 0.5% to EUR/USD and 0.5% to GBP/USD, 50 USD each.

With a 40-pip stop on EUR/USD and 10 USD per pip per lot, the lot size is 50 ÷ (40 × 10) = 0.125, rounded down to 0.12 lots (actual risk 48 USD). With a 50-pip stop on GBP/USD, the lot size is 50 ÷ (50 × 10) = 0.10 (actual risk 50 USD). If both stops are hit, you lose 98 USD, instead of the 200 USD you would have risked trading each at 1%.

Correlation is not stable

The relationship between pairs changes with economic cycles, central bank decisions and stress episodes. Two pairs that showed a +0.9 correlation for months can drop to +0.3 in a quarter, and in moments of panic many correlations rise together because everything moves with the dollar or with risk appetite; that is exactly when diversification is most needed and works least.

Measure correlation over several windows (for example, 30, 90 and 250 days) and be wary if they differ a lot. Use correlation as a warning, not an exact figure. And remember that two instruments can be correlated through a common factor that does not appear in their names, such as risk appetite, oil or interest rates.

How to cap total portfolio risk

Set a ceiling on total open risk, meaning the sum of what you would lose if every stop were hit at once. A common ceiling is between 2% and 5% of the account, depending on your tolerance, and it should be lower than the daily loss limit you defined in your plan. Also set a maximum number of open trades in the same direction on the same currency (for example, two).

Before opening a new trade, ask yourself: which other positions would lose if this idea fails? If the answer is “almost all of them”, reduce the size or wait for one to close. Also check how a scenario where every position loses would affect your drawdown: our drawdown calculator shows how much you would need to gain to recover.

Common mistakes

Believing that trading many pairs is diversifying; opening new trades on the same idea “because the other pair has not moved yet”; treating a hedge with an inverse pair as free protection when you are actually paying two spreads and reducing both risk and profit; using an old correlation without updating it; and forgetting news risk on a currency shared by several trades.

Another mistake is looking only at risk per trade and ignoring risk per currency. Risking 1% per trade seems prudent, until you discover that six positions depend on the dollar falling.

Summary: a checklist before opening another trade

Calculate the net exposure by currency of all your open positions. Identify which ones depend on the same factor and treat them as one group with a shared risk budget (for example, 1% split across two trades). Check that the sum of open risk does not exceed your total ceiling.

Review correlation over more than one window and do not take it as a permanent fact. Remember that correlation reduces risk only when it is low or negative, and that the worst possible loss is still the sum of all stops. This content is educational; trading with leverage carries a high risk of loss.

Educational content, not financial advice. Risk disclosure

Related tool

Drawdown calculatorFind out how much you need to gain to recover a loss and how many losses in a row your account can take.

More guides