Position Sizing for Futures: Contracts, Ticks and Micros

8 min read

Futures have no lots and no pips: they have contracts, points and ticks, and every product has its own value per point. The risk principle is the same as in forex (stop first, size second), but the arithmetic changes, and a slip can cost far more because a single index contract can represent tens of thousands of dollars of exposure. This guide shows you how to go from “I want to risk 1%” to “I trade exactly this many contracts”.

What changes when you move from forex to futures

A futures contract is a standardized agreement to buy or sell a fixed quantity of an asset at a set price on a set date. Because the exchange fixes the quantity, you cannot choose 0.37 lots: you trade 1, 2 or 10 contracts, and the smallest contract available limits how finely you can tune your risk.

That is why many futures come in “micro” versions, one tenth (or less) of the standard contract. On a small account, the difference between risking 250 USD precisely and being forced to risk 500 USD or skip the trade is often just the micro.

Point, tick and tick value

The tick is the smallest price move the exchange allows. The point is the unit we use to talk about movement (for example, one point of the S&P 500). The point value is how many dollars a contract gains or loses per point, and the tick value is the dollars per tick. The relationship is simple: tick value = tick size × point value.

In the E-mini S&P 500 (ES), each point is worth 50 USD and the tick is 0.25 points, so each tick is worth 0.25 × 50 = 12.50 USD. In the Micro E-mini S&P 500 (MES), the point is worth 5 USD and the tick is still 0.25, so each tick is 1.25 USD. That tells you an MES is exactly one tenth of an ES.

A mental table of the most common contracts

Nasdaq 100: the E-mini NQ is worth 20 USD per point and the micro MNQ 2 USD per point; the tick is 0.25 points in both, which gives 5 USD per tick in NQ and 0.50 USD per tick in MNQ. WTI crude oil (CL): the contract is 1,000 barrels, the tick is 0.01 USD per barrel, so it is worth 1,000 × 0.01 = 10 USD; a 1 USD move in the barrel equals 1,000 USD per contract.

Gold (GC): the contract is 100 troy ounces, the tick is 0.10 USD per ounce and is worth 100 × 0.10 = 10 USD; a one-dollar move in price equals 100 USD per contract. Micro gold (10 ounces) and micro crude (100 barrels) also exist on some markets. The exchange publishes the official specifications, and your broker may offer only some of the products, so always confirm the contract specs, tick and multiplier before trading.

The formula: contracts = risk ÷ (stop × point value)

First decide how much money you are risking: balance × risk percentage. Then measure the stop in points (the distance between your entry and the level where your idea is invalidated). The risk of one contract is stop in points × point value, and the number of contracts is total risk divided by the risk of one contract.

If you work in ticks, the calculation is equivalent: contracts = risk ÷ (stop in ticks × tick value). Pick one of the two and always use it, because mixing points and ticks is one of the most common sources of errors by a factor of 4 on indices with a 0.25 tick.

Example 1: ES versus MES on a 25,000 USD account

With 25,000 USD and 1% risk, you risk 250 USD. You want to buy the index with a stop 10 points from your entry. With ES, the risk per contract is 10 × 50 = 500 USD, so 250 ÷ 500 = 0.5 contracts: rounded down that is 0, meaning you cannot take this trade at this risk.

With MES, the risk per contract is 10 × 5 = 50 USD and 250 ÷ 50 = exactly 5 contracts. If the stop is hit, you lose 5 × 10 × 5 = 250 USD, exactly as planned. Trading 1 ES instead would have meant risking 500 USD, 2% of the account, double what you had decided.

Example 2: rounding down with NQ, MNQ and MES

With a 60,000 USD account and 1% risk (600 USD), assume a 15-point stop in NQ. Each contract risks 15 × 20 = 300 USD, and 600 ÷ 300 = 2 contracts. The same setup with MNQ gives 15 × 2 = 30 USD per contract and 600 ÷ 30 = 20 contracts; it is the same risk, but with finer granularity for scaling in or out.

A case with a remainder: 400 USD of risk on MES with a 12.5-point stop. The risk per contract is 12.5 × 5 = 62.50 USD and 400 ÷ 62.50 = 6.4 contracts. Always round down, to 6, for an actual risk of 6 × 62.50 = 375 USD. Rounding up to 7 would risk 437.50 USD, above your limit.

Example 3: crude oil (CL) and gold (GC)

In crude, you buy CL with a stop of 0.40 USD per barrel, which is 40 ticks. The risk per contract is 40 × 10 = 400 USD (or 0.40 × 1,000 barrels, the same result). If you risk 1,000 USD, 1,000 ÷ 400 = 2.5 contracts, so you trade 2, with an actual risk of 800 USD.

In gold, assume a stop of 8 USD per ounce. The risk per contract is 8 × 100 = 800 USD (80 ticks of 10 USD). With 1,600 USD of risk, 1,600 ÷ 800 = exactly 2 contracts. Notice that both markets have a 10 USD tick, but a crude tick is 0.01 USD and a gold tick is 0.10 USD: prices move at different paces, so always compare in dollars, not in ticks.

Initial margin and maintenance margin

Margin is not a fee or a loss: it is the good-faith deposit your broker locks up while the position is open. Initial margin is what you need to open; maintenance margin is the minimum equity you must keep to avoid a margin call or a forced liquidation. Both vary by exchange, product, current volatility and broker policy (many brokers offer reduced margin only during intraday trading hours).

The key is not to confuse margin with risk. Suppose, purely as an illustration, that a broker asks for 1,500 USD of margin per MES. The 5 contracts in example 1 would lock up 7,500 USD, 30% of a 25,000 USD account, yet your planned maximum loss at the stop is still 250 USD. Margin tells you whether you can open the position; the stop and the size tell you how much you can lose. And if price gaps through your stop, the loss can exceed the planned risk.

Expiries and rollover

Futures expire. Index contracts (ES, NQ) expire quarterly, in March, June, September and December; crude has monthly expiries and gold has several active months a year. Near expiry, volume migrates to the next contract, and that migration is called the roll. If you hold a position, you must close it and reopen it in the new contract, or let your platform do it if it offers that feature.

Two things change when you roll. First, the two contracts may trade at different prices (because of financing costs or the shape of the curve), so your stop and target must be recalculated on the new contract. Second, some contracts (such as crude) involve physical delivery, so retail brokers usually close positions or require you to close them before the notice dates; check their rules, because the effective deadline is earlier than the official expiry.

Common mistakes

Rounding up; using the standard contract’s point value with a micro (or the other way round); confusing points with ticks; forgetting that commissions are charged per contract and per side; assuming the stop guarantees the maximum loss when there are price gaps or thin liquidity; and scaling up impulsively because the micro “feels small”.

Another mistake is sizing from your starting balance instead of your current equity, or ignoring available margin after a losing streak: with less equity, the same number of contracts weighs more. Always recalculate with today’s figures.

Summary: your five-step procedure

One: decide your risk in dollars (balance × percentage). Two: set the stop in points based on the market, not on your comfort. Three: look up the point value and tick value of the exact contract. Four: divide the risk by stop × point value and round down; if the result is below 1, use a micro or skip the trade. Five: check that margin, commissions and expiry fit your plan.

You can verify each calculation with our lot size calculator. This content is educational and is not financial advice; trading leveraged futures carries a high risk of loss.

Educational content, not financial advice. Risk disclosure

Related tool

Lot size calculatorCalculate the exact position size from your balance, risk and stop loss.

More guides